用于加快开关速度的串联解决方案
新型1200V sixpack解决方案,用于电梯驱动的伺服驱动应用和网测能力回馈。
用于电梯驱动的伺服驱动应用和网测能量回馈系统要求开关频率达到16 kHz。Vincotech新型1200 V sixpack系列产品具有双二极管配置,不仅可以使您的设计轻松满足这些要求,还能大幅降低系统成本。
该新型flowPACK 1系列产品采用高速IGBT4和串联二极管技术,提高了效率,实现了成本与收益的最佳平衡。
该三相逆变器模块采用低电感行业标准flow 1封装,覆盖从25A到75A电流对应的功率段。
所有模块也都可预涂相变材料。
主要优势
- 采用高速IGBT4降低了开关损耗
- 650V二极管串联配置进一步减小了开关损耗
- 集成热传感器大幅降低了温度测量的难度和成本
- 开尔文发射极增强了电流控制和开关性能
- 标准封装尺寸,可简化电路板设计,并降低其成本
一般特性
- 三相逆变器
- 采用高速IGBT4降低了开关损耗
- 采用串联二极管理念进一步降低了开关损耗
- 集成热传感器
- 高侧和低侧感应
目标应用
目前,可从常规样品申请渠道获得 flowPACK1 系列产品的样品。
(翻译校对:Warren Wang,编辑:Anna Chai)
The Tandem Solution for Faster Switching
Servo drive applications and line converters for elevator drives require switching frequencies up to 16 kHz. Vincotech’s new 1200 V sixpack family features a dual-diode setup not only to equip your designs to easily satisfy these requirements; they also slash system costs.
Equipped with high-speed IGBT4 and tandem diode technology, this new flowPACK 1 family boosts efficiency to strike the best balance between costs and benefits.
Packaged in the low-inductive industry-standard flow 1 housing, these three-phase inverter modules cover a wide power range from 25 A up to 75 A.
All modules are also available with phase-change material.
Main Benefits
- High-speed IGBT4 drives down switching losses
- 650 V diodes in tandem configuration cut the switching losses even further
- Integrated thermal sensor makes it so much easier and cheaper to measure temperature
- Kelvin emitter enhances current control and switching performance
- Standardized footprint for easier, cheaper PCB design
General Features
- Three-phase inverter
- High-speed IGBT4 for reduced switching losses
- Tandem diode concept for reduced switching losses
- Integrated thermal sensor
- High-side and low-side sense
Target Applications
- Industrial drives
- Servo and elevator drives
Samples of the flowPACK 1 family are available through our usual channels.
【Vincotech is a trademark of Vincotech Holdings S.à.r.l.】